Auto-Cover Maintenance and Repair


Regular auto-cover maintenance is recommended for optimal auto-cover performance. Maintaining your auto-cover will ensure that the auto-cover system runs efficiently and is reliable. Dirt and debris can build up in the auto-cover tracks or in the auto-cover housing causing uneven opening and closing. Keeping your system clean is necessary to prolong the life of the auto-cover and its vital parts such as ropes and sliders. Just like brake pads on a car, pulleys, sliders, and ropes will wear over time. Inspecting and replacing worn parts will prevent future problems. Auto-cover maintenance should be done annually, typically in the spring when opening the swimming pool.

New Wave Pools LLC recommends and provides the following services for auto-covers. If the auto-cover maintenance is completed during the residential swimming pool opening, the rate to add on this service is $199.99. If the service is requested at any other time the cost is slightly higher which includes the service call charge. Any parts that are needed are not included in this rate.

Auto-cover maintenance includes;

• Clean out auto-cover housing and drain
• Inspect Sliders
• Lubricate all Pulleys
• Adjust the Torque Limiter
• Adjust the Ropes for Even Cover Operation
• Clean Out Auto-cover Tracks
• Tighten all Loose Bolts and Screws
• Clean Auto-cover and apply UV Protectant

New Wave Pools LLC also services and repairs most makes and models of auto-covers.

Auto-cover repairs include but not limited to;

• Fabric Replacement
• Rope Replacement
• Track, Pulleys, and Guide Replacement
• Alignment
• Electrical Troubleshooting

auto cover maintenance